by | 25 May 2010
As I previously mentioned, Siemens PLM Software launched its HD-PLM Technology Framework at Expo 2010 Shanghai China with a press event and product demonstrations. This was an ideal venue for addressing the globalization demands that manufacturing and process industry companies are facing today.
HD-PLM is based on four basic tenets that define how the technology framework will help users make better decisions faster so they can spend more time innovating.
Tags:
NX |
CAD |
PLM |
SiemensPLM |
Design |
Siemens |
Manufacturing |
manufacturing |
NX7 |
HD-PLM |
by | 24 May 2010
One of the highlights of NX7 is the extension of Synchronous Technology into freeform modeling. NX freeform modeling streamlines the advanced shaping process by making it easy to work with any geometry, including imported models. Users can start with simple prismatic or analytic geometry and use advanced shaping tools to form complex organic models in significantly less time.
Tags:
NX |
CAD |
SiemensPLM |
Design |
Modeling |
NX7 |
freeform |
shapes |
x-form |
i-form |
by | 21 May 2010
Yesterday, 20 May 2010, we announced NX7. In this second blog post, I will review some of the new features in NX7.
For existing users, we have made NX7.5 even more compelling. Following is a short list of our goals for this release:
Tags:
NX |
CAD |
PLM |
SiemensPLM |
CAE |
Design |
Analysis |
Modeling |
CAM |
HD3D |
by | 20 May 2010
Today in Shanghai China at the World Exposition Shanghai China 2010 (Expo 2010), we announced NX7 the latest release of our NX software.
NX 7 is the first product to support Siemens’ new high definition PLM (HD-PLM) technology framework, unveiled earlier in the day.
Tags:
NX |
CAD |
PLM |
3D |
SiemensPLM |
CAE |
Design |
Siemens |
Analysis |
Simulation |
by | 14 May 2010
Below are a few videos on the flooding in Nashville that started two weeks ago. Our thoughts are with all those affected.
As you can imagine, it’s created a little havoc for our PLM Connection Americas event that was planned for later this month at the Gaylord Hotel in Nashville.
Tags:
Siemens PLM |
plmconx |
PLM Connection |
PLMConx |
PLMconx |
PLMCONX |
by | 07 May 2010
This is not an easy task as the amount of information to take into account is huge. Starting with architectural information like the plant layout to libraries of standard manufacturing equipment which can be used to build the products to the required output of the manufacturing lines.
In addition there are a lot of people from different departments involved which need to communicate to finally get an optimized, reliable and well functioning factory.
In a previous blog post Brad Whitmore from Procter & Gamble described how he and his team solved this challenge.
Tags:
tecnomatix |
Tecnomatix |
Plant Design and Optimization |
FactoryCAD |
Layout Planning |
by | 03 May 2010
Do you want to hold you CAD models in your hand? I mean, physically?
This is already possible for several years and known as rapid prototyping, 3D prototyping or direct digital manufacturing. And the price of these 3D printers is getting down. Still it’s something fascinating. I had the opportunity to see the whole process live at the Hannover Fair. Starting with the design in NX and then just using the regular printing capability to launch the HP printer driver. After some additional calculations the printer starts working. A few hours later you can already hold the part in your hands.
Take a look at this video to see the whole process in action.
Tags:
NX |
SiemensPLM |
tecnomatix |
Tecnomatix |
Rapid Prototyping |
Direct Digital Manufacturiing |
3D prototyping |
by | 29 Apr 2010
As mentioned in my previous blog post about Hannover Fair here are some interesting pictures from the fair.
The first one is from the introduction video for the Virtual Commissioning showcase which we run every hour. Take a closer look and you will realize the move from virtual too real in the picture.
Tags:
NX |
SiemensPLM |
tecnomatix |
Tecnomatix |
NX CAM |
Virtual Commissioning |
virtual commissioning |
Hannover Fair |
Recent Posts
- Moving day
- Manufacturing Excellence
- Steve Bashada talks about HD-PLM
- Steve Bashada talks about PLM opportunities for customers
- Solid Edge Tips and Tricks are back! New users start here
- Steve Bashada talks about PDM to PLM transition
- Open Standards for PLM
- CAD folks, help me out with a simple survey experiment
- Avatars @ Ford
- NX7 Part 4 – Lifecycle Simulation (CAE)
Recent Comments
Susan Cinadr on Maintenance pack (MP1) for Solid Edge with synchronous technology 2.
CNC Blechbearbeitung on Maintenance pack (MP2) for Solid Edge with synchronous technology 2.
Balkrishna on Maintenance pack (MP1) for Solid Edge with synchronous technology 2.
Dehydration symptoms on Early indicators are positive.
Ian Webb on Announcing Solid Edge With Synchronous Technology 2.
Mike Payne on Announcing Solid Edge With Synchronous Technology 2.
David Breitstein on Get to the point!.
Alastair Robertson on Produce “spectacular rainbow-colored images”.
Tags
- Solid Edge
- Siemens PLM
- plmconx
- NX
- tecnomatix
- Tecnomatix
- CAD
- solid edge
- PLM Connection
- teamcenter
- PLM
- Teamcenter
- SiemensPLM
- Solid Edge ST
- PLMConx
- PLMconx
- Synchronous Technology
- ST
- productivity
- Simulation
- CAE
- simulation
- synchronous technology
- product development
- Design
- Productivity
- FEA
- 3D
- PLM Europe
- PLM World
- product design
- analyst event
- Velocity Series
- Analysis
- Siemens
- Solid Edge with Synchronous Technology
- PLMEurope08
- Tips & Tricks
- Digital Factory
- Modeling
Categories
Connect with Siemens PLM Software
Older / Archives
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- Complete Archives